 |
Highspeed Lathes
 TYPE HEP-8 - Multi-Function Machine
A fully automatic hopper-fed production machine up to 350mm in length and 120mm in diameter with sanding.
Optional pre-drilling unit for both ends of the pieces prior to turning, and with 8 stations including 2 profile knife stations and 3 sanding stations.
Output variable between 400 and 1200 turned and sanded pieces per hour. Ideally suited for high volume Bun Feet; Bed Spindles and similar turnings.
|
|
|
 TYPE HHE - Fully Automatic Copying Lathe
Cast bed with two-bed length of either 900mm or 1200mm.
Optional boring through the headstock, and up to 5 back knife holders.
Designed for high output of spindles, legs etc: with maximum diameters of 120mm. Set up considerably reduced from earlier models of these types of lathes with electronic functions.
|
|
|
 TYPE HHM - Automatic Copying Lathe
Cast bed with three bed lengths of either 500mm; 900mm or 1200mm.
Optional boring through the headstock, and up to 5 back knife holders.
Designed for volume output of spindles, legs etc: with maximum diameters of 70mm.
|
|
|
 TYPE HEMCOMAT - Fully Automatic Copying Machine
This machine comes complete with PLC control. Maximum distance between centres 1450mm, and a maximum diameter of 300mm.
Equipped with 3 hydraulic copy toolholders and 2 standard back knife holders.
Options include up to 6 back knife holders; Rotary and Square stayrings.
Offers infinitely variable production from short 'sample' runs to volume runs on the same machine.
|
|
|
home | lathes | sanders | shapers | specials | contact | what's new
|
|
